Tmedia™ TMG7800

The TelcoBridges Tmedia TMG7800 is our high density carrier-grade VoIP gateway and is defined by the highest scalability in the entire Tmedia family.

Our scalable building blocks approach offers carriers a VoIP gateway from 16 to 1024 T1/E1, or 1 to 48 DS3, or 1 to 16 OC3/STM-1 per cluster.  A single TMG7800 system can control up to 4 clusters creating a non-blocking switch for up to 131,072 channels. The TMG7800 also provides high availability and redundancy, which is a requirement for carrier-grade networks.

Product Characteristics

• 3U to 22U VoIP single gateway system per cluster
• 512 to 32,768 VoIP channels per cluster
• 16 to 1024 T1/E1, or 1 to 48 DS3, or 1 to 16 OC3/STM-1 per cluster
• Up to 4 clusters within a single TMG7800 system
• Supports a mix of multiple TDM interface types
• Non-blocking routing from or to any ports (TDM or VoIP)
• SIP, SIGTRAN, SS7 ISUP, ISDN PRI, E1 CAS R2, T1 CAS R1, H.248
• Redundant AC or DC power supplies
• Optional Tmedia 1+1 and N+1 groups
• Up to 2,700,000 BHCC

TMedia 1+1 and +1 Protection Characteristics

• Enables full facility protection (TDM and IP)
• No single point of failure
• Five nine’s redundancy

TMG7800 System

TMG7800 solution components

• 2 TMG7800-CTRL
• 1 to 16 TMG7800 telecom units (T1/E1, DS3, OC3/STM-1) per cluster
• 2 TMG7800-TMS per cluster (optional)
• TMG7800-N+1 patch panel(s) (optional)
• TMG7800-1+1 patch panel(s) (optional)

TMG7800-CTRL

• Manages all components in the system
• Performs call control on all components
• Supports active/standby redundancy

TMG7800 telecom unit

• Runs signaling stacks
• Provides TDM and VoIP network interfaces
• Hardware accelerated media processing and transcoding
• Each additional unit adds more capacity to the system

TMG7800-TMS (optional)

• Non-blocking universal media switched fabric across all telecom units
• Manage and propagate the system TDM clock
• Second TMG7800-TMS enables redundancy

1+1 Patch Panel (optional)

• TDM facility protection group for two telecom units
• Passive protection (no power required)

N+1 Patch Panel (optional)

• TDM facility protection group for up to 15 telecom units

Capacity and Voice Processing

PSTN Interfaces

• 16 to 1024 T1/E1 per cluster or
• 1 to 48 DS3 per cluster or
• 1 to 16 OC3/STM1 with APS per cluster
• Framing independently configurable per port
• 2 BITS interfaces on DS3/OC3/STM-1 units

VoIP Interfaces

• Up to 32 Ethernet ports 100/1000Base-T per cluster (2 per telecom unit)
• RJ45 connectors on rear of unit
• Up to 256 different IP addresses per cluster (16 per telecom unit)
• Ethernet port bonding and 802.1q VLAN support

Vocoding

• 512 to 32,768 VoIP channels with universal codecs per cluster
• Universal codecs: G.711, G.723.1, G.726, G.729ab, T.38 V.17, clear mode (RFC 4040)
• Other codecs: G.722, G.722.2 (AMR-WB), G.728, G.729eg, iLBC, AMR, EVRC, GSM FR/EFR, QCELP, T.38 V.34

Fax/Modem/Data

• T.38 fax relay (V.17 and V.34)
• Automatic G.711 fallback
• Modem and data passthrough, NSE, VBD support
• Clear mode (RFC 4040)

DTMF Relay

• RFC 2833/4733, SIP INFO method, in-band

Echo cancellation

• G.168 echo cancellation
• 128 ms echo tail on all channels simultaneously

Voice Processing

• Adaptive and programmable jitter buffer (20 to 200 ms)
• Voice ActivityDdetection (VAD)
• Comfort Noise Generation (CNG)

Voice recording and announcement playback

• Up to 32,768 channels per cluster (using optional IVR mezzanine on each telecom unit)

High Availability & Redundancy

• IP port redundancy
• Self-recovery software
• Fault tolerant software
• MTP2/SS7 links redundancy

1+1 solution (optional)

1+1 solution extends the high-availability and redundancy features of the TMG7800

• TMG7800 telecom unit redundancy
• Full capacity protection (TDM and IP)
• Configuration database redundancy
• Seamless software upgrade
• M3UA/MTP3/ISUP redundancy

Tmedia 1+1 solution consists of:

• 1 active unit and 1 standby unit
• Up to 8 units 1+1 Patch Panel(s) per cluster

1+1 Patch Panels are passive (no power required)

TMedia N+1 solution (optional)

The Tmedia N+1 solution extends the high-availability and redundancy features of the TMG7800

• TMG7800 telecom unit redundancy
• Full capacity protection (TDM and IP)
• Configuration database redundancy
• Seamless software upgrade
• M3UA/MTP3/ISUP redundancy

Tmedia N+1 solution consists of:

• Up to 15 active unit(s) and 1 standby unit
• Up to 7 units N+1 Patch Panel(s)

Signaling (Simultaneous signaling support)

Simultaneously supports any combination or all of the following signaling protocols:

SIP

• Supported RFCs: 2327, 2833, 2976, 3204, 3261, 3262, 3263, 3264, 3311, 3323, 3325, 3326, 3372, 3389, 3398, 3515, 3551, 3555, 3578, 3581, 3665, 3666, 3764, 3891, 4028, 4694, 4733, 5806
• SIP-I/SIP-T
• Extensive SIP header manipulation

SS7

• Up to 512 MTP2 links (56, 64, n x 56/64 kbps) or 32 x HSL
• Multiple redundant MTP2 links
• Up to 64 originating point codes and 256 linksets
• Up to 512 destination point codes
• ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92, ANSI 95, Q.767, Telcordia 97, ETSI v3, China, Singapore, UK, SPIROU, Japan NTT, Russia

SIGTRAN

• M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
• SCTP (raw IP and UDP)
• SS7 termination and/or relay supported
• Up to 512 M2UA / M2PA links
• Up to 64 M3UA peer server processes

ISDN PRI

• Q.931 ISDN PRI (user and network side)
• ISDN variants: NI-2, 4ESS, 5ESS, DMS-100, DMS-250, Euro ISDN ETSI NET5 (France, Germany, UK, China, Hong Kong, Korea), Euro Numeris (VN6), NTT (Japan), Australia
• ISDN NFAS with D-channel backup

CAS

• MF R1 (including E&M, loop start, ground start)
• MF R2 (including standard ITU, Brazil, Mexico, Venezuela)
• Customizable script files to implement any CAS variant

Call Control

H.248 (MEGACO) Call Control

• ITU-T H.248 versions 1 and 2
• UDP transport
• DTMF and fax detection
• Call progress, DTMF and COT tone generation
• Call quality and inactivity alerts
• H.248 control port redundancy (supports virtual IP)
• Conferencing
• CLIP (H.248.23)
• Redundancy – no loss of calls

Session Management and Billing

• SIP peer availability polling
• RTP inactivity monitoring, RTCP
• CDR generation (RADIUS and/or csv files)
• Integrated lawful intercept (ETSI ES 201 671 v2.1.1)

Other Features

• HTTPS request for external applications (call routing, fraud protection, and robocall mitigation)
• MOS scores for every VOIP call

OAMP+T

Operation & Administration

• Provisioning, management and status GUI
• CLI and configuration file machine-to-machine interface (RESTful)
• Configuration change audit logging
• Access, user and privilege management
• SNMP V2, V3 GET, TRAPs (alarms)
• Extensive SNMP call statistics MIBs

Management

• Up to 4 Ethernet ports 100/1000Base-T (2 per TMG-CTRL unit)
• Up to 2 VGA for local monitor (1 per TMG-CTRL unit)
• Up to 8 USB ports (4 per TMG-CTRL unit)
• Up to 2 DB9 RS232 serial port (2 per TMG-CTRL unit)
• GUI-based and CLI system upgrade
• GUI-based configuration copy, backup and restore
• Storage for multiple software versions
• Storage for multiple configuration files
• Extensive system status display

Provisioning

• Non-service affecting configuration changes
• Offline configuration validation
• Multiple configuration files archive
• Northbound API (RESTful) for automated provisioning

Network Analytics (TB Analytics)

• Live call trace with protocol information and ladder diagrams
• Live test call with media playback and recording
• TB Sigtrace – Protocol signaling capture into pcap files
• Media call recording (scriptable for calling and called numbers)

Maintenance

• Replaceable fan filters on telecom units

Regulatory compliance

Safety

• CAN.CSA C22.2
• EN 60950-1:2005
• EN 60950-1:2006

EMC

• FCC Part 15:2013, Subpart B,
• CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)

Others

• RoHS compliant
• NEBS level 3 compliant

Environmental

• Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
• Storage temperature: -10 to +85 °C, 95% rel. hum. non-condensing

Electrical Characteristics

TMG7800 System

• 90 to 260 VAC, 47 to 63 Hz, -40 to -60 VDC
• Redundant power supplies (for each component)
• From 616 to 3210W power consumption per cluster (depending on configuration)

TMG7800 telecom units

• 90 to 260 VAC, 47 to 63 Hz, -40 to -60 VDC
• Hot-swap redundant power supply
• Maximum 131W power consumption

TMG7800-TMS

• 90 to 260 VAC, 47 to 63 Hz, -40 to -60 VDC
• Hot-swap redundant power supply
• Maximum 72W power consumption

TMG7800-STM1-N+1 patch panel

• 90 to 260 VAC, 47 to 63 Hz, -40 to -60 VDC
• Redundant power supply
• Maximum 20W power consumption

Dimensions and Weight

TMG7800 Overall System

• 3U to 22U per cluster depending on configuration
• 19” rack mount
• Height: 5.25” (133.4mm) to 38.5” (979mm)
• Width: 17.4” (442mm)
• Depth: 22” (559mm)
• Weight: 60.2lbs (27.3kg) to 332.4lbs (151.4kg)

TMG7800 telecom units

• 1U, 19” rack mount
• 1.75” (44.5mm) H x 17.4” (442mm) W x 16” (406mm) D
• 20lbs (9.1kg)

TMG7800-TMS

• 1U, 19” rack mount
• 1.75” (44.5mm) H x 16.9” (429mm) W x 16” (406mm) D
• 17lbs (7.71kg)

TMG7800-N+1 patch panel

• 1U, 19” rack mount
• 1.75” (44.5mm) H x 16.9” (429mm) W x 16” (406mm) D
• 12.2lbs (5.6kg)

TMG7800-1+1 patch panel

• 1U, 19” rack mount
• 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
• 3.4 lbs (1.6 kg)