Tsig™ TSG3200

The TelcoBridges Tsig TSG3200 is a high-density carrier-grade SS7/SIGTRAN gateway and converter.

Supporting multiple TDM interface types, the TSG3200 is the most cost effective SS7/Signaling gateway solution for service providers that is currently available on the market.

Product Characteristics

• 1U SS7/SIGTRAN gateway
• TDM interface (ordering option)
  • 16 to 64 T1/E1 or
  • 1 to 3 DS3 or
  • 1 OC3/STM1 with APS
• SIGTRAN, SS7
• SCCP routing with Global Title Translation (GTT)
• Supports conversion from ISDN and CAS protocols
• Software upgradeable by T1/E1 increments
• Hot-swap redundant power supply (AC or DC)
• Tsig 1+1 solution option

Tsig 1+1 Protection Characteristics

• Supports all TDM interface types: T1/E1, DS3 or OC3/STM1
• Passive solution (no power required)
• Enables full facility protection (TDM and IP)
• Active/Standby architecture with two TSG3200 units
• No single point of failure
• Five nine’s redundancy

Interfaces

PSTN interfaces

• 16 to 64 T1/E1 or
• 1 to 3 DS3 or
• 1 OC3/STM1 with APS
• Independently configurable per port
• SCSI connectors to RJ48C patch panel

Packet interfaces

• Up to 4 Ethernet ports 100/1000Base-T
• RJ45 connectors on rear of unit
• Up to 16 different IP addresses
• Ethernet port bonding and 802.1q VLAN support

High Availability & Redundancy

• Power supply redundancy
• IP port redundancy
• Self-recovery software
• Fault tolerant software
• MTP2/SS7 links redundancy

Tsig 1+1 solution (optional)

The Tsig 1+1 solution extends the high-availability and
redundancy features of the TSG3200

• SS7/SIGTRAN gateway redundancy (active/standby)
• Full capacity protection (TDM and IP)
• Configuration database redundancy
• Seamless software upgrade
• M3UA/MTP3/ISUP redundancy

Tsig 1+1 solution consists of:

• 1 active unit and 1 standby unit
• Up to 2 units 1+1 Patch Panel(s)

1+1 Patch Panels are passive (no power required)

Signaling

Simultaneously supports any combination or all of the following signaling protocols:

SS7

• Up to 64 MTP2 links (56, 64, n x 56/64 kbps) or
  • 2 x HSL
• Multiple redundant MTP2 links
• Up to 64 originating point codes and 256 linksets
• Up to 256 destination point codes
• ISUP variants: ITU 92, ITU 97, ANSI 88, ANSI 92,
• ANSI 95, Q.767, Telcordia 97, ETSI v3, China,
• Singapore, UK, SPIROU, Japan NTT, Russia
• SCCP routing and global title translation (GTT) based on called/calling party, SSN and Opcode

SIGTRAN

• M2PA, M2UA, M3UA (IPSP, ASP, SG), IUA
• SCTP (raw IP and UDP)
• SS7 termination and/or relay supported
• Up to 64 M2UA / M2PA links
• Up to 64 M3UA peer server processes

ISDN PRI

• Q.931 ISDN PRI (user and network side)
• ISDN variants: NI-2, 4ESS, 5ESS, DMS-100, DMS-250, Euro ISDN ETSI NET5 (France, Germany, UK, China, Hong Kong, Korea), Euro Numeris (VN6), NTT (Japan), Australia
• ISDN NFAS with D-channel backup

CAS

• MF R1 (including E&M, loop start, ground start)
• MF R2 (including standard ITU, Brazil, Mexico, Venezuela)
• Customizable script files to implement any CAS variant

TMG-CONTROL (Call Control)

Toolpack framework call control

• Call routing based on: trunk group, calling/called numbers (with digit manipulation) and/or various other protocol information/headers.
• Customizable routing including priority-based, loadbalancing, black listing, call limiting, route retries, etc.
• Customizable call cause code mapping
• Programmable call routing: Access and manipulation of call parameters (SIP, SS7 and ISDN), including Nature of Address (NOA)
• RADIUS authentication and authorization (supports multiple RADIUS servers)
• NPA-NXX routing (over 5 million records)

Session management and billing

• CDR generation (RADIUS and/or csv files)
• Integrated lawful intercept (ETSI ES 201 671 v.2.1.1)

OAMP+T

Operation & Administration

• Provisioning, management and status GUI
• CLI and configuration file machine-to-machine interface (RESTful)
• Configuration change audit logging
• Access, user and privilege management
• SNMP V2, V3 GET, TRAPs (alarms)
• Extensive SNMP call statistics MIBs

Maintenance

• 2 Ethernet control ports 100/1000Base-T
• 1 USB Type B serial port
• 1 RJ45 RS232 serial port
• GUI-based and CLI system upgrade
• GUI-based configuration copy, backup and restore
• Storage for multiple software versions
• Storage for multiple configuration files
• Extensive system status display

Provisioning

• Non-service affecting configuration changes
• Offline configuration validation
• Multiple configuration files archive
• Northbound API (RESTful) for automated provisioning

Network Analytics (TB Analytics)

• Live call trace with protocol information and ladder diagrams
• Live test call with media playback and recording
• TB Sigtrace – Protocol signaling capture into pcap files
• Media call recording (scriptable for calling and called numbers)

Maintenance

• Replaceable fan filters

Dimensions & Weight

TSG3200

• 1U, 19” rackmount
• 1.75” (44.5 mm)H x 16.9” (429 mm)W x 16” (406 mm)D
• 14.5 lbs (6.6 kg)

TSG3200 1+1 patch panels

• 1U, 19” rackmount
• 1.75” (44.5 mm) H x 16.9” (429 mm) W x 5.25” (133 mm) D
• 3.4 lbs (1.6 kg)

Regulatory Compliance

Safety

• CAN.CSA C22.2
• EN 60950-1:2005
• EN 60950-1:2006

EMC

• FCC Part 15:2013, Subpart B,
• CE Mark (EN55022:2010, Class A, EN61000, ETSI EN 300 386)

Others

• RoHS compliant
• NEBS level 3 compliant

Electrical Characteristics

• 90 to 260 VAC, 47 to 63 Hz or -36 to -72 VDC
• Hot-swap redundant power supply (AC or DC)
• Maximum 138W power consumption

Environmental

• Operating temperature: 0 to +70 °C, 95% rel. hum. non-condensing
• Storage temperature: -10 to +85 °C, 95% rel. hum. non-condensing